Recessed Connector Plate for 2 x D-Type Speakon/XLR

These are for flush-mounting from the rear only. The hole size is just big enough for Neutrik NL4MP connectors, but it is a very tight fit, and requires an evenly applied force to push them into place and get an airtight fit. You should not push against the metal pins, but against the plastic barrel only. A suitably sized hex socket of around 13-15mm is the ideal tool.

Recessed steel connector plate with 2 off 24mm diameter holes to accept panel mount fittings such as Speakon, XLR or Powercon connectors. Fixing holes tapped to M3 for ease of assembly. Hard-wearing black powder coated finish.

Overall Dimensions: 136mm wide x 90mm high.

Cutout: 110mm x 65mm.

Depth 13mm. If you're planning on fitting this with NL4MP Speakon sockets - which is by far the most common application for this connector plate - we've got a handy PCB to make life easier, also available as a kit of everything you need , or for a completely hassle-free solution, as a fully finished, cabinet-ready assembly.