Fane Sovereign 6-100 6" 100W 8 Ohm Twin Pack

Medium-power 6" driver ideal for use in pro-sound applications. Works well for midrange in small sealed box or as mid/bass driver in vented boxes. Frequency range: 60Hz - 10kHZ.

The all new FANE Sovereign Series comprises fifteen cone drivers designed for a broad spectrum of sound reinforcement situations. Midrange, fullrange, bass-mid and dedicated bass applications are comprehensively covered.
Featuring heavy duty FANE pressed steel chassis providing rugged durability and consistant performace in even the most demanding of environments, glass fibre voice coils capable of delivering outstanding power handling capabilities and carefully selected cone materials for smooth tonal characteristics and extended bass response, the FANE Sovereign represents an exciting and versitile answer to the demands of a varied and demanding range of audio applications.

THIELE SMALL PARAMETERS:

• FS Hz 115 Hz
• RE Ohms 6.9 Ohms
• Qms 12.8
• Qes 0.67
• Qts 0.64
• Vas Ltr 2.2
• Vd litres 0.032
• CMS (mm/N) 0.08
• BL T/m 13.25
• Mms (grms) 23.94
• Xmax (mm) 2.5
• Sd (cm2) 139.2
• Efficiency % 0.5
• Le (1kHz) 1.15 mH

ELECTRO ACOUSTIC SPECIFICATIONS:

• Nominal Chassis Diameter 6.5'
• Impedance 8 Ohms
• Power Handling 100 w (EIA 426A)
• Peak Power (6dB Crest Factor) 400 w (EIA 426A)
• Usable Frequency Range -6dB 60 Hz - 7 KHz
• Sensitivity (1 w - 1 m) 93 dB
• Moving Mass inc. Air Load 23.94 grams
• Minimum Impedance Zmin 7 Ohms
• Effective Piston Diameter 5.15' / 131 mm
• Peak Displacement Volume of Cone Vd 0.03 litres
• Magnet Weight 20 oz
• Magnetic Gap Depth 0.23" / 6 mm
• Flux Density 1.0 Tesla
• Coil Winding Height 0.39" / 10 mm
• Voice Coil Diameter 1.5" / 38.1 mm

MATERIALS OF CONSTRUCTION:

• Former Material Glass Fibre
• Voice Coil Copper
• Magnet Material Ferrite
• Chassis Steel
• Cone Paper
• Surround / Edge Termination Polyvinyl Damped Dbl. Half
• Roll Linen
• Dust Dome Paper
• Connectors Solder Tag
• Polarity Positive Voltage at Red Terminal Causes Forward Motion of Cone

MOUNTING / SHIPPING INFORMATION:

• Overall Diameter 6.50' / 165 mm
• Flange Height 0.27' / 7 mm
• Baffle Hole Diameter F/M 5.78' / 147 mm
• Baffle Hole Diameter R/M 5.78' / 147 mm
• Gasket Supplied Front & Rear
• Fixing Holes 4x 5.9 mm on 6.14" / 155.96 mm PCD
• Depth 2.20' / 56 mm
• Weight 3.63 lb / 1.65 kg
• Recommended Enclosure Volume 0.35 - 0.70 cu ft / 10 - 20 litres
• Shipping Weight 4.29 lb / 1.95 kg
• Packing Carton Dimensions 105 x 205 x 205 mm