 |
| |||||
|
| |||||||||||||||||
Fane Sovereign Pro 10-300 - 10" 300W 8 Ohm
The Sovereign Pro 10-300 is intended for use in two-way ported enclosures such as the classic bass driver plus horn tweeter or compression driver format. The unit features die cast chassis with long throw motor system and high linearity suspension allowing solid bass reproduction at high-power levels. This this driver delivers a smooth and balanced response throughout its frequency range and delivers well balanced tonal characteristics when properly matched to appropriate high-frequency drivers. The Sovereign Pro 10-300 is designed for use in 14 to 40 litre ported enclosures and features a 2.5 inch sandwich voice coil capable of 300 Watt power handling and 98 dB sensitivity.
- 600 W Program Power.
- 97.5 dB Sensitivity (1W/1m).
- Highly versatile in 2-way ported enclosures.
- Long-throw motor system design with high linearity suspension.
- Solid bass and smooth mid-range performance with extended frequency response.
- UK manufactured cone with optimised pulp offering increased strength, durability and performance.
- Designed for use in 25-80 Litre ported enclosures.
- 3-inch Inside/ outside windings copper voice coil.
ELECTRO ACOUSTIC SPECIFICATIONS:
- Nominal Chassis Diameter 10" / 254 mm
- Impedance 8 Ohms
- Power Handling 300 w (A.E.S.)
- Peak Power (6dB Crest Factor) 1200 w (A.E.S.)
- Usable Frequency Range -6dB 45 Hz - 4 kHz
- Sensitivity (1 w - 1 m) 98. dB
- Moving Mass inc. Air Load 37 grams
- Minimum Impedance Zmin 6.8 Ohms
- Effective Piston Diameter 8.46" / 214.88 mm
- Peak Displacement Volume of Cone Vd 0.2 litres
- Magnet Weight 56 oz
- Magnetic Gap Depth 0.39" / 10 mm
- Flux Density 1.1 Tesla
- Coil Winding Height 0.70" / 18 mm
- Voice Coil Diameter 2.5" / 63.5 mm
-
THIELE SMALL PARAMETERS:
- FS Hz 58 Hz
- RE Ohms 5.7 Ohms
- Qms 6.08
- Qes 0.34
- Qts 0.32
- Vas Ltr 41 litres
- Vd litres 0.208 litres
- CMS (mm/N) 0.211 mm/N
- BL T/m 15.3 T/m
- Mms (grms) 37 grams
- Xmax (mm) 5.5 mm
- Sd (cm2) 378 cm2
- Efficiency % 2.36%
- Le (1k Hz) 1.68 mH
- Overall Diameter 11.16" / 283.4 mm
- Width Across Flats 10.34" / 262.7 mm
- Flange Height 0.305" / 7.8 mm
- Baffle Hole Diameter F/M 8.97" / 227.83 mm
- Baffle Hole Diameter R/M N/A
- Gasket Supplied Rear
- Fixing Holes 4x 0.218" diam on 10.625 PCD 4x 5.5 mm diam on 270 PCD
- Depth 4.33" / 110 mm
- Weight 11.02 lb / 5 kg
- Recommended Enclosure Volume 0.17 - 0.52 cu ft / 5- 15 litres
- Shipping Weight 12.56 lb / 5.7 kg
- Packing Carton Dimensions 288 x 288 x 195 mm
- Former Material Glass Fibre
- Voice Coil Copper inside/outside wound
- Magnet Material Ferrite
- Chassis Die-cast Aluminium
- Cone Curvilinear Paper
- Surround / Edge Termination Polyvinyl Damped Double Half-Roll. Linen
- Dust Dome Solid Paper
- Connectors Push-button Spring Terminals
- Polarity Positive voltage at red terminal causes forward motion of cone
MOUNTING / SHIPPING INFORMATION:
MATERIALS OF CONSTRUCTION:
| Other Fane products similar to Fane Sovereign Pro 10-300 - 10" 300W 8 Ohm: |
|
||
|
|
SEARCH results for other drivers with similar T-S Parameters to Fane Sovereign Pro 10-300 - 10" 300W 8 Ohm