Convair Electronics Filters and Crossovers are hand built in the UK to an exacting standard. Through the use of quality components, insertion points are kept to a minimum and crossover points are kept within tight tolerances. Besides sounding great these filters and crossovers are constructed to withstand a rough life on the road. Custom specifications are available for larger orders.

SPECIFICATION

• Type: Two Way Crossover
• Frequency: 1.6KHz
• Slope: 12dB/octave
• Impedance: 8 ohms
• RMS Power: 400W
• Program Power: 800W
• Dimensions: 105 x 150 x 46mm high
• Insertion loss better than 0.4dB, Crossover point within +/-10% of stated value.

A two way crossover separates the low and high frequencies to a woofer and tweeter respectively. This results in better sound quality and is essential to protect the high frequency driver.

Convair 2 way crossovers include space to add attenuation resistors to the high pass side of the filter to better match the output of the high frequency driver to that of the low frequency driver. The default configuration is without resistors, the positions of the optional resistors are shown in the second and thrid images above. Please contact us for advice with regard to fitting resistor, or for more details click the link below:
Crossover Attenuation Guidance