 |
| |||||
|
| ||||||||||||
PCB9006 NL8 PCB for 2 x NL8MPRXX Speakon Dish
Fed up of wasting time wiring up links on speakons?
We were too...
So we created this handy little PCB which lets you quickly and easily link all pins on a pair of Neutrik NL8MPRXX, with the option to mount screw terminal blocks, or just solder 2.5mm wires directly to the PCB. This brings down the assembly time of a speakon panel considerably, when compared to stripping back link wires and direct soldering onto the Speakon.
Price is per PCB - there are two in the image to show front and back. Speakons and Dishes are not included.
The first image shows both sides of the PCB - it is a double sided PCB, and the side with the white silk screen print is where the pins of the speakon stick through. You should be able to see the pin identification on the PCB when soldering.
The second image is for illustrative purposes to show a finished configuration - terminal blocks and speakon connectors ARE NOT INCLUDED and must be purchased separately. There are 4 wire links that must be soldered onto the board to complete the circuit. Please see image 2 for locations.
There are solder pads suitable for wire of up to 2.5 sq mm CSA.
The spacing between connectors on this PCB is designed to match up perfectly with our twin speakon dish: TUFRCONDNLT4L - Large Dish for 2 x Neutrik G-Series sockets spacing is 60mm center to center of the NL8 connecotr - also available as a ready-to-assemble kit, with all required components, or as a completely finished, fully soldered cabinet-ready sub assembly
We were too...
So we created this handy little PCB which lets you quickly and easily link all pins on a pair of Neutrik NL8MPRXX, with the option to mount screw terminal blocks, or just solder 2.5mm wires directly to the PCB. This brings down the assembly time of a speakon panel considerably, when compared to stripping back link wires and direct soldering onto the Speakon.
Price is per PCB - there are two in the image to show front and back. Speakons and Dishes are not included.
The first image shows both sides of the PCB - it is a double sided PCB, and the side with the white silk screen print is where the pins of the speakon stick through. You should be able to see the pin identification on the PCB when soldering.
The second image is for illustrative purposes to show a finished configuration - terminal blocks and speakon connectors ARE NOT INCLUDED and must be purchased separately. There are 4 wire links that must be soldered onto the board to complete the circuit. Please see image 2 for locations.
There are solder pads suitable for wire of up to 2.5 sq mm CSA.
The spacing between connectors on this PCB is designed to match up perfectly with our twin speakon dish: TUFRCONDNLT4L - Large Dish for 2 x Neutrik G-Series sockets spacing is 60mm center to center of the NL8 connecotr - also available as a ready-to-assemble kit, with all required components, or as a completely finished, fully soldered cabinet-ready sub assembly
Detailed specifications unavailable, please EMAIL the sales office for additional information.
| Other Convair Electronics products similar to PCB9006 NL8 PCB for 2 x NL8MPRXX Speakon Dish: |
|
||
|
|