Convair Electronics :: Convair Electronics Crossovers & Components :: Convair Electronics Low Pass Filters
|
|
Convair Electronics 2 kHz Low Pass Filter 8 Ohm
Convair Electronics Filters and Crossovers are hand built in the UK to an exacting standard. Through the use of quality components, insertion points are kept to a minimum and crossover points are kept within tight tolerances. Besides sounding great these filters and crossovers are constructed to withstand a rough life on the road. Custom specifications are available for larger orders.
- SPECIFICATIONS
- Type: Low Pass Filter
- Frequency: 2KHz
- Slope: 12dB/octave
- Impedance: 8 ohms
- RMS Power: 350W (THD approx. 0.5-0.7%)
- Program Power: 700W (THD approx. 1.0-1.5%) Peak Power: 1400W
- Dimensions: 118 x 105 x 46mm high
- Insertion loss better than 0.4dB, Crossover point within +/-10% of stated value.
A low pass filter removes frequencies higher than the crossover point. This improves sound quality and ensures the driver only receives the portion of the signal it is intended to reproduce.
We are able to build to order most common values between 0.1mH and 7mH, subject to limitations of bobbin size and wire diameter. Please email the sales office.
Detailed specifications unavailable, please EMAIL the sales office for additional information.
Other products similar to Convair Electronics 2 kHz Low Pass Filter 8 Ohm: |
|