 |
| |||||
|
| |||||||||||||||||
B&C DE75PTN DE75TN8P 110W 8 Ohm 2" Bolt On Compression Driver (Faston)
- 220 W continuous program power capacity
- 2” horn throat diameter
- 75 mm (3 in) aluminium voice coil
- Titanium diaphragm
- 500 – 18000 Hz response
- 107 dB sensitivity
Specifications
- Throat Diameter (1) 50 mm (2 in)
- Nominal Impedance (2) 8 ohm
- Minimum Impedance 8.3 ohm
- Nominal Power Handling (3) 110 W
- Continuous Power Handling (4) 220 W
- Sensitivity (1W/1m) (5) 107 dB
- Frequency Range 0.5 -18 kHz
- Recommended Crossover (6) 0.8 kHz
- Voice Coil Diameter 75 mm (3 in)
- Winding Material Aluminium
- Inductance 0.14 mH
- Diaphragm Material Titanium
- Flux Density 1.85 T
Mounting and Shipping Info
- Four M6 holes 90° on 102 mm (4 in) diameter
- Overall Diameter 170 mm (6.7 in)
- Depth 64 mm (2.5 in)
- Net Weight (1 unit) 4.5 kg (9.9 lb)
1 Driver mounted on B&C ME75 horn
2 Also available in 16 ohms, data upon request
3 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range . Power calculated on rated minimum impedance.
4 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
5 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
6 12 dB/oct. or higher slope high-pass filter.
| Other B & C products similar to B&C DE75PTN DE75TN8P 110W 8 Ohm 2" Bolt On Compression Driver (Faston): |
|
||
|
|