B&C DE16 30W 8 Ohm 1" Bolt On Compression Driver
1" high frequency compression driver. Low mass mylar diaphragm ensures a very flat frequency response and optimized ceramic magnet assembly allows for high sensitivity and low distortion up to 18 kHz.
Specifications1
- Throat Diameter 25 mm (1 in)
- Nominal Impedance 8 Ω
- Minimum Impedance 7.8 Ω
- Power Handling(2200 –20000 Hz)
- Nominal2 30 W
- Continuous Program3 60 W
- Sensitivity (1W/1m)4 107 dB
- Frequency Range 1.5 – 18 kHz
- Recommended Crossover5 2.2 kHz
- Voice Coil Diameter 44 mm (1.7 in)
- Winding Material Aluminium
- Inductance 0.11 mH
- Diaphragm Material Mylar
- Flux Density 1.5 T
Mounting and Shipping Information
- Two M6 holes 180° on 76 mm (3 in) diameter
- Overall Diameter 102 mm (4 in)
- Depth 58 mm (2.3 in)
- Net Weight (1 unit) 1.6 kg (3.5 lb)
1 Driver mounted on B&C ME 45 horn.
2 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range. Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal Impedance. Average SPL from 1000 to 18000 Hz.
5 12 dB/oct. or higher slope high-pass filter.
| Other B & C products similar to B&C DE16 30W 8 Ohm 1" Bolt On Compression Driver : |
|
