B&C 15SW100 15" 1500W 8 Ohm
- 3000 W continuous program power capacity
- 100 mm (4 in) split winding copper voice coil
- 40 - 1500 Hz response
- 95 dB sensitivity
- 57 mm peak-to-peak excursion before damage
- Double silicone spider with optimized compliance
- Ventilated voice coil gap for reduced power compression
- Aluminium demodulating ring for very low distortion
Specifications
- Nominal diameter 380 mm (15.0 in)
- Nominal impedance 8 Ω
- Minimum impedance 6.5 Ω
- Nominal power handling * 1500 W
- Continuous power handling * 3000 W
- Sensitivity (1W/1m) * 95.0 dB
- Frequency range 40 - 1500 Hz
- Voice coil diameter 100 mm (4.0 in)
- Winding material Copper
- Former material Glass Fibre
- Winding depth 32 mm (1.26 in)
- Magnetic gap depth 16 mm (0.63 in)
- Flux density 1.15 T
Design
- Surround shape Triple Roll
- Cone shape Radial
- Magnet material Neodymium Inside Slug
- Spider Double Silicone
- Pole design T-Pole
- Woofer cone treatment TWP Waterproof Both Sides
- Recommended enclosure 120.0 dm3 (4.24 ft3)
- Recommended tuning 35 Hz
Parameters
- Fs 37 Hz
- Re 5.4 Ω
- Qes 0.34
- Qms 4.8
- Qts 0.31
- Vas 110.0 dm3 (3.9 ft3)
- Sd 855.0 cm2 (132.5 in2)
- η₀ 1.6 %
- Xmax 12.5 mm
- Xvar 13.0 mm
- Mms 176 g
- Bl 25.6 Txm
- Le 2.2 mH
- EBP 108 Hz
Mounting And Shipping Info
- Overall diameter 393 mm (15.5 in)
- Bolt circle diameter 374 mm (16.7 in)
- Baffle cutout diameter 353.0 mm (13.9 in)
- Depth 190 mm (7.5 in)
- Flange and gasket thickness 16 mm (0.63 in)
- Air volume occupied by driver 6.0 dm3 (0.21 ft3)
- Net weight 9.5 kg (21.0 lb)
- Shipping units 1
- Shipping weight 10.9 kg (24.0 lb)
- Shipping box 420x420x200 mm (16.5x16.5x7.9 in)
| Other B & C products similar to B&C 15SW100 15" 1500W 8 Ohm: |
|
SEARCH results for other drivers with similar T-S Parameters to B&C 15SW100 15" 1500W 8 Ohm
B&C 15SW100 15" 1500W 8 Ohm PDF data sheet (1 Mb)
View B & C website for more information for B & C 15SW100