 |
| |||||
|
| |||||||||||||||||
B&C 10FW64 10" 250W 8 Ohm
- 500 W continuous program power capacity
- 64 mm (2.5 in) aluminium voice coil
- 65 - 3000 Hz response
- 98 dB sensitivity
Specifications:
Design:
Parameters:
Mounting And Shipping Info:
- Nominal diameter 250 mm (10.0 in)
- Nominal impedance 8 ohms
- Minimum impedance 6.4 ohms
- Nominal power handling 250 W
- Continuous power handling 500 W
- Sensitivity (1W/1m) 98.0 dB
- Frequency range 65 - 3000 Hz
- Voice coil diameter 64 mm
- Winding material Aluminium
- Former material Glass Fibre
- Winding depth 14 mm
- Magnetic gap depth 8 mm
- Flux density 1.25 T
Design:
- Surround shape Double Roll
- Cone shape Exponential
- Magnet material Ferrite
- Spider Single
- Pole design T-Pole
- Woofer cone treatment WP Waterproof Front Side
- Recommended enclosure 26.0 dm3
- Recommended tuning 62 Hz
Parameters:
- Fs 63 Hz
- Re 5.0 ohms
- Qes 0.25
- Qms 3.4
- Qts 0.23
- Vas 27.0 dm3
- Sd 320.0 cm2
- Reference efficiency 2.6 %
- Xmax 5.0 mm
- Xvar 5.5 mm
- Mms 34 g
- Bl 16.4 Txm
- Le 0.9 mH
- EBP 252 Hz
Mounting And Shipping Info:
- Overall diameter 261 mm
- Bolt circle diameter 245 mm
- Baffle cutout diameter 230.0 mm
- Depth 116 mm
- Flange and gasket thickness 13 mm Air volume occupied by driver
- 2.5 dm3
- Net weight 5.9 kg
- Shipping weight 6.5 kg
- Shipping box 330x330x160 mm
- Recone Kit RCK10FW648
| Other B & C products similar to B&C 10FW64 10" 250W 8 Ohm: |
|
||
|
|
B&C 10FW64 10" 250W 8 Ohm PDF data sheet (404 kb)
View B & C website for more information for B & C 10FW64 Our database has the following results for compatibility of this product with common speakers and components.
Martin Audio F10+ DLS10004 | Woofer | Alternative
Martin Audio F10+ DLS10004 | Woofer | Alternative
Our database of parts includes a wide range of products, and in many cases offers cost effective alternatives for repair. Alternatives are loosely grouped into three types:
Original - Usually an exact match to the original product, and just the 'standard' part from the factory which gets rebadged by manufacturer with their own brand and part number. Occasionally, there are subtle tweaks made from the standard part, but its virtually impossible for us to determine this. If we have listed the part as Original, it means we are confident the performance is the same.Aftermarket - Aftermarket parts often become available from factories in the far east once the original part is no longer manufactured. They are intended to be a close match, and provide a cost-effective alternative.
Equivalent - These are alternative options, which provide very similar performance, but are not the same as the original. In some cases the performance may actually be improved. We have used both our own experience, and feedback from customers in generating list of alternatives. Alternatives like this are useful when the original part is no longer made, there is no aftermarket option, so the only choice is to upgrade with the nearest current equivalent product.