 |
| |||||
|
| |||||||||||||||||
1.5" high frequency compression driver. The particular mylar/titanium diaphragm using a 3" edgewound flat aluminium wire voice coil and a optimized very high energy ceramic magnet assembly using a copper shorting ring assembly produce smooth response, very high efficiency, and outstanding sonic characteristics.
This product appears to be unavailable. Please contact us if you require this product, and we will make further enquiries or look for an equivalent model..
Specifications1
- Throat Diameter 38 mm (1.5 in)
- Nominal Impedance 8 Ω
- Minimum Impedance 8.4 Ω
- Power Handling (800 –20000 Hz)
- Nominal2 80 W
- Continuous Program3 160 W
- Sensitivity (1W/1m)4 108 dB
- Frequency Range 0.5 – 18 kHz
- Recommended Crossover 5 800 Hz
- Voice Coil Diameter 75 mm (3 in)
- Winding Material Aluminium
- Inductance 0.14 mH
- Diaphragm Material Titanium
- Flux Density 1.9 T
Mounting and Shipping Information
- Four M6 holes 90° on 102 mm (4 in) diameter
- Overall Diameter 180 mm (7.1 in)
- Depth 70 mm (2.8 in)
- Net Weight 6 kg (13.2 lb)
1 Driver mounted on B&C ME 90 horn.
2 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range. Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal Impedance. Average SPL from 500 to 18000 Hz.
5 12 dB/oct. or higher slope high-pass filter.
| Other B & C products similar to B&C DE700 (Mylar): |
|
||
 |
B&C MMD3A8 8 Ohm Diaphragm for DE65, DE72, DE75, DE82, DE85, DE700, DE750, 12CX32, 15CX40 (Faston) £71.75 inc VAT | ||
|
|