 |
| |||||
|
| ||||||||||||
4 Pack of Connector Dish with 2 x NL4MPXX Speakons and Terminal Block
Tired of soldering wires to Speakons?
This handy pre-assembled Speakon connector plate comes ready to fit to your cabinet, to save you the time and inconvenience of soldering or crimping. It has 4 screw terminals which will accept wire of up to 2.5 mm sq CSA. The two speakon sockets are linked together for daisy chaining speaker cabinets
Overall dimensions of mounting panel: 136mm wide x 90mm high.
Cutout: 110mm x 65mm.
Depth of assembled connector panel: 55mm
This handy pre-assembled Speakon connector plate comes ready to fit to your cabinet, to save you the time and inconvenience of soldering or crimping. It has 4 screw terminals which will accept wire of up to 2.5 mm sq CSA. The two speakon sockets are linked together for daisy chaining speaker cabinets
Overall dimensions of mounting panel: 136mm wide x 90mm high.
Cutout: 110mm x 65mm.
Depth of assembled connector panel: 55mm
Copper thickness: 2.8 mils (0.0711mm)
Average track width linking between pins: 12mm
The tracks between pins feature a high surface area, and over the short distance have a VERY low resistance calculated to be approximately 0.001 ohms (it's so small we can't physically measure it).
Current carrying capacity in excess of 25 amps.
Average track width linking between pins: 12mm
The tracks between pins feature a high surface area, and over the short distance have a VERY low resistance calculated to be approximately 0.001 ohms (it's so small we can't physically measure it).
Current carrying capacity in excess of 25 amps.
| Other Tuff Cab products similar to 4 Pack of Connector Dish with 2 x NL4MPXX Speakons and Terminal Block: |
|
||
|
|