|
|
RCF L10-568H - 10" 200W 8 Ohm Suitable for Nexo PS10 R1 and similar
High efficiency 10" mid-bass. Suitable for use as a replacement driver for Nexo PS10 R1 and similar enclosures
Very high sensitivity, excellent linearity.
A copper ring helps reducing distortion and smoothing the response up to 3 kHz.
Voice coil construction, suspensions and cone materials designed to survive at 350 Watt RMS power.
Applications:
A very light moving mass, a curve response linear up to 3 kHz makes the L10-568H a very good solution for high quality two way systems.
The 2" copper voice coil guarantee a very high power handling and perfect low frequency control.
Main Features:
- 2-inch, inside/outside aluminum voice coil
- 400W continuous program power handling
- 97.5 dB Sensitivity
- 50 Hz - 3 kHz Frequency range
- M-roll surround and exponential cone geometry
- Copper ring
This product has been discontinued - please do not try to order this item we will not be able to supply it - the product details are here for reference only. Please contact a member of staff, and we may be able to find an equivalent product for you.
General Specifications | |
Nominal Diameter: | 250 / 10 mm/inch |
Rated Impedance: | 8 Ω |
Program Power: | 400 W AES |
Power handling capacity: | 200 W AES |
Sensitivity: | 97.5 dB |
Frequency Range: | 50 Hz ÷ 3000 Hz |
Effective Piston Diameter: | 210 / 8.3 mm/inch |
Max Excursion Before Damage (peak to peak): | 40 / 1.6 mm/inch |
Minimum Impedance: | 6.6 Ω |
Voice Coil Diameter: | 51 / 2 mm/inch |
Voice Coil Material: | Copper |
Voice Coil Winding Depth: | 13 / 0.5 mm/inch |
Number of layers: | 2 |
Kind of layer: | inside / outside |
Top Plate Thickness: | 9 / 0.35 mm/inch |
Cone Material: | No pressed pulp |
Cone Design: | Curved |
Surround Material: | Polycotton |
Surround Design: | M - roll |
Thiele/Small Parameters | |
Resonance frequency: | 70 Hz |
DC resistance: | 5.1Ω |
Mechanical factor: | 6 |
Electrical factor: | 0.41 |
Total factor: | 0.38 |
BL Factor: | 12.8 T · m |
Effective Moving Mass: | 30 g |
Equivalent Cas air load: | 29.4 liters |
Effecttive piston area: | 0.035 m2 |
Max. linear excursion (mathematical): | 4.3 mm |
Voice - coil inductance @ 1kHz: | 1.05 mH |
Half-space efficiency: | 2.37% |
Mounting information | |
Overall Diameter: | 260 / 10.2 mm/inch |
Bolt Circle Diameter: | 242-247 / 9.2-9.7 mm/inch |
Bolt Hole Diameter: | 7 / 0.3 mm/inch |
Front Mount Baffle Cut-out: | 230 / 9.1 mm/inch |
Rear Mount Baffle Cut-out: | 229 / 9.0 mm/inch |
Depth: | 115 / 4.5 mm/inch |
Volume occupied by the driver: | 1.1 / 0.04 liters/ft3 |
Net Weight: | 4.4 / 9.7 kg/lbs |
Shipping information | |
Shipping weight: | 4.8 / 10.6 kg/lbs |
Other RCF products similar to RCF L10-568H - 10" 200W 8 Ohm: |
|
SEARCH results for other drivers with similar T-S Parameters to RCF L10-568H - 10" 200W 8 Ohm Suitable for Nexo PS10 R1 and similar
Our database has the following results for compatibility of this product with common speakers and components.
Nexo PS10 R1 | Woofer | Original
Nexo PS10 R1 | Woofer | Original
Our database of parts includes a wide range of products, and in many cases offers cost effective alternatives for repair. Alternatives are loosely grouped into three types:
Original - Usually an exact match to the original product, and just the 'standard' part from the factory which gets rebadged by manufacturer with their own brand and part number. Occasionally, there are subtle tweaks made from the standard part, but its virtually impossible for us to determine this. If we have listed the part as Original, it means we are confident the performance is the same.Aftermarket - Aftermarket parts often become available from factories in the far east once the original part is no longer manufactured. They are intended to be a close match, and provide a cost-effective alternative.
Equivalent - These are alternative options, which provide very similar performance, but are not the same as the original. In some cases the performance may actually be improved. We have used both our own experience, and feedback from customers in generating list of alternatives. Alternatives like this are useful when the original part is no longer made, there is no aftermarket option, so the only choice is to upgrade with the nearest current equivalent product.