|
|
Eminence Kappa 15LF - 600W 15" extended bass driver 8 ohm
Low frequency woofer for pro audio in a vented mid-bass or bass enclosure. Also suitable for bass guitar.
Specification:
- Nominal Basket Diameter 15", 381mm
- Nominal Impedance* 8 ohms
- Power Rating**
- Watts 600W
- Music Program 1200W
- Resonance 39Hz
- Usable Frequency Range 38Hz - 2.7kHz
- Sensitivity*** 99dB
- Magnet Weight 95 oz.
- Gap Height 0.37", 9.53mm
- Voice Coil Diameter 3", 76.2mm
Thiele & Small Parameters:
- Resonant Frequency (fs) 39Hz
- DC Resistance (Re) 5.4
- Coil Inductance (Le) 1.27mH
- Mechanical Q (Qms) 6.08
- Electromagnetic Q (Qes) 0.41
- Total Q (Qts) 0.38
- Compliance Equivalent Volume (Vas) 159 liters / 5.6 cu.ft.
- Peak Diaphragm Displacement Volume (Vd) 471cc
- Mechanical Compliance of Suspension (Cms) 0.15mm/N
- BL Product (BL) 18.6 T-M
- Diaphragm Mass Inc. Airload (MMs) 105 grams
- Efficiency Bandwidth Product (EBP) 95
- Maximum Linear Excursion (Xmax) 5.5mm
- Surface Area of Cone (Sd) 856.3 cm2
- Maximum Mechanical Limit (Xlim) 10.4mm
Mounting Information:
- Recommended Enclosure Volume
- Sealed N/a
- Vented 62-193 liters / 2.2-6.8 cu.ft.
- Driver Volume Displaced 251.7 cu.in. / 4.12 liters
- Overall Diameter 15.16", 384.9mm
- Baffle Hole Diameter 13.87", 352.3mm
- Front Sealing Gasket Fitted as standard
- Rear Sealing Gasket Fitted as standard
- Mounting Holes Diameter 0.25", 6.4mm
- Mounting Holes B.C.D. 14.56", 369.9mm
- Depth 162mm, 6.38"
- Net Weight 20 lbs, 9.1 kg
- Shipping Weight 22.3 lbs, 10.1 kgs
Materials of Construction:
- Coil Construction Copper voice coil
- Coil Former Polyimide former
- Magnet Composition Ferrite magnet
- Core Details Vented core
- Basket Materials Pressed steel basket
- Cone Composition Paper cone
- Cone Edge Composition Cloth cone edge
- Dust Cap Composition Solid composition paper dust cap
|
|
|
|
Other Eminence products similar to Eminence Kappa 15LF - 15" 600W 8 Ohm: |
|
SEARCH results for other drivers with similar T-S Parameters to Eminence Kappa 15LF - 600W 15" extended bass driver 8 ohm
Our database has the following results for compatibility of this product with common speakers and components.
Alto TSSUB15 | Woofer | Equivalent
Alto TSSUB15 | Woofer | Equivalent
Our database of parts includes a wide range of products, and in many cases offers cost effective alternatives for repair. Alternatives are loosely grouped into three types:
Original - Usually an exact match to the original product, and just the 'standard' part from the factory which gets rebadged by manufacturer with their own brand and part number. Occasionally, there are subtle tweaks made from the standard part, but its virtually impossible for us to determine this. If we have listed the part as Original, it means we are confident the performance is the same.Aftermarket - Aftermarket parts often become available from factories in the far east once the original part is no longer manufactured. They are intended to be a close match, and provide a cost-effective alternative.
Equivalent - These are alternative options, which provide very similar performance, but are not the same as the original. In some cases the performance may actually be improved. We have used both our own experience, and feedback from customers in generating list of alternatives. Alternatives like this are useful when the original part is no longer made, there is no aftermarket option, so the only choice is to upgrade with the nearest current equivalent product.