Convair Electronics PCB9001 for TUFF87160 NL4MPXX Speakon Dish
COOKIES: Our website uses cookies in order to provide a better online experience, this is essential for use of the shopping basket, and to login to our website. We require your consent to use cookies in order to meet relevant regulations. Please CLICK HERE to indicate your consent and continue using our website. We do not use third party tracking cookies on our website, cookies are used for this site's functionality only.
Convair Electronics
Convair Electronics PCB9001 for TUFF87160 NL4MPXX Speakon Dish
Links all 4 pins of 2 x Neutrik NL4MP spaced at 40mm centres
 
Product Code: CNVCE9001 | Brand:
Convair Electronics PCB9001 for TUFF87160 NL4MPXX Speakon Dish

Convair Electronics PCB9001 for TUFF87160 NL4MPXX Speakon Dish Convair Electronics PCB9001 for TUFF87160 NL4MPXX Speakon Dish Convair Electronics PCB9001 for TUFF87160 NL4MPXX Speakon Dish 
£1.50
£1.25 ex VAT
4-9 £1.45 ea.10-49 £1.40 ea.50+ £1.36 ea.
Login to see JAM Club pricing
Not a member? Join Now
£3.43 DELIVERY to mainland UK.
Convair Electronics PCB9001 for TUFF87160 NL4MPXX Speakon Dish

Fed up of wasting time wiring up links on speakons?

We were too...

So we created this handy little PCB which lets you quickly and easily link all pins on a pair of Neutrik NL4MP, with the option to mount a 4 way screw terminal block, or just solder 2.5mm wires directly to the PCB. Depending on your tools, we estimate that this can bring down the assembly time of a speakon panel down to under 2 minutes, whereas stripping back link wires and direct soldering can typically take up to 10-15 minutes, a MASSIVE time saving if you're building batches of speakers.

You can secure wires with a cable tie using one or both of the slots cut into the PCB.

Price is per PCB - there are two in the image to show front and back.

The first image show both sides of the PCB - it is a double sided PCB, and the side with the white silk screen print is where the pins of the speakon stick through. You should be able to see the pin identification on the PCB when soldering.

The second image is for illustrative purposes to show a finished configuration - terminal blocks and speakon connectors ARE NOT INCLUDED and must be purchased separately. There are also two sets of solder pads suitable for wire of up to 2.5 sq mm

The third image show the complete assembly with the speakon sockets mounted on a recess dish using M3 nuts/bolts. For a secure quick mounting the Neutrik MFD mounting accessory is highly recommended.

The spacing between connectors on this PCB is designed to match up perfectly with our twin speakon dish: TUFF87160 - Large Recessed Steel Connector Plate for 2 x Speakon

or alternatively you can use this on your own panels with the spacing between the speakons at 40mm.

Distance between Speakon centres 40mm
Copper thickness: 2.8 mils (0.0711mm)
Average track width linking between pins: 12mm

The tracks between pins feature a high surface area, and over the short distance have a VERY low resistance calculated to be approximately 0.001 ohms (it's so small we can't physically measure it).

Current carrying capacity in excess of 25 amps.

Other Convair Electronics products similar to Convair Electronics PCB9001 for TUFF87160 NL4MPXX Speakon Dish:
PCB9006 NL8 PCB for 2 x NL8MPRXX Speakon Dish

£2.40 inc VAT
(£2.00 ex VAT)

PCB9004 for TUFF8718 NL4MPXX Speakon Dish

£1.73 inc VAT
(£1.44 ex VAT)

PCB9005 NL8 PCB for 2 x Neutrik NL8MPRXX

£2.40 inc VAT
(£2.00 ex VAT)

UK & ROI
Delivery Info for Convair Electronics PCB9001 for TUFF87160 NL4MPXX Speakon Dish  to locations within the United Kingdom and Ireland
EUROPE
Delivery Info for Convair Electronics PCB9001 for TUFF87160 NL4MPXX Speakon Dish  to locations in Europe